01
Portable Truck Weighing Scale
A 58 mm plate direct-buried with no civil pit, sealed to IP68 and rated for 150% overload. Built for axle load weighing at temporary or fast-moving sites.
58 mmIP68±0.5%
View specifications →
FIG. 01 / SENSOR ASSEMBLY02 / PRODUCT LINES
Four Product Lines, One Weighing Standard
Start with the site, not the catalogue. A pit-free portable plate, a welded permanent deck, a wide-flange sensor and the indicators that turn both into records — each line below is built around a different constraint on the ground.
01 / CHOOSE BY CONSTRAINT
Four ways to put a number on a load.
Every card below links to a full specification. If you are unsure which applies, the short guide under the grid will narrow it down.
02
Steel Weighbridge Deck
U-shaped fully-welded closed cavities, Sa2.5 blasting, a coating dry film of at least 120 µm and a third-party 2-million-cycle fatigue test. For permanent, high-cycle installations.
3500×1000 mm20/50/100 t≥120 µm
View specifications →03
Wide-Flange Load Cell
A 58 mm sensor plate with 150% overload headroom and full-wheel load integration to cancel eccentric driving. The measuring heart of a weigh-in-motion subsystem.
58 mmIP681–100 km/h
View specifications →
04
Weighing Indicator & Software
Indicators, data acquisition, licence plate recognition and LED boards, with 7×24 unattended running, offline local caching and anti-cheating logic.
7×24offline cachemulti-site
View specifications →02 / A SHORT WAY TO NARROW IT DOWN
Four questions that settle most specifications.
Answer these before you look at a data sheet. They decide the product line far more reliably than a capacity figure on its own.
No civil works allowed?Portable 58 mm plate or wide-flange load cell — direct-buried with no foundation pit.
Permanent, thousands of cycles a week?U-shaped fully-welded closed-cavity steel deck with Sa2.5 blasting and ≥120 µm coating.
Need an enforcement record, not just a weight?Add the indicator and acquisition stack: image capture, licence plate recognition, LED board, data logging.
Different wheelbases on one lane?ZDG multi-deck combinations, or configurable deck dimensions from 3500×1000 mm upward.
NEXT STEP / 01
Tell us what you need to weigh.
Send the axle loads, deck size and site conditions. We will come back with a factory quote, the trade terms and a delivery window you can plan around.